Just a quick post to let those few who may be checking this blog occasionally - I am still alive :)
My day job is eating me alive at present and I can't see things slowing down much before the end of the year. I have got six weeks of leave booked before then but part of that will be overseas and another week (with travel) at the Clubman Nationals in Jindabyne. Throw in a bit of time with family etc and the car isn't going to get much attention.
That said, I've been making (slow) progress on some design issues, particularly the tail end of the car. If I find the time I need for it, I'll draw it in Sketchup and post it here for comment.
And now, back to work. Yes, right now, At 11:30pm on a Sunday, I'm logged in to work checking things :(
20 September 2009
04 May 2009
Another catchup post with a wide variety of things:
- Apologies to a couple of people who had made comments that hadn't appeared. I didn't notice them waiting for approval and Blogger (apparently) didn't send me an email to say they where there.
Feb 2009 - Re-posting this here from where it has already appeared on OzClubbies etc.
The Parable of the Plates
In the month of February an angel visited Dominic, giving to him several shining metal plates. And great was the beauty of these plates for they had been cut not by human hands but by the artificers of Sea-En-Sea. And Dominic did gaze upon the plates and knew that they were good for they had been made to The Plan.
And six were the plates in number but only three in shape for they had been made in pairs. And clear from their shape was their destiny. And this destiny was to be permanently joined to the Bay of the Engine, thence to work tirelessly at support and bracing.
And Dominic held the plates to the chassis, even though it still remains partial and unformed as it has been, and will be, eternally. And the plates did fit - verily, so close was the fit that he did exclaim, saying "That's pretty snug. You couldn't get a fanny hair in that gap". And great was his pleasure at this fitting.
And then he didst say to himself "Bugger, how am I going to drill 16mm holes in alignment when the tubes are already welded into the chassis". And his disappointment at this poor planning was much. But, familiar with pain and struggle in the service of the revered Clubman, he didst regather himself and cogitated for some time. And this cogitation was helped by the application of soothing waters bearing the Holy names Coonawarra and Macaren Vale. And the cogitation did bear fruit and he awakened saying "The bloody plate can be it's own drill guide".
So he did clamp the plates firmly and many were the checkings of alignment. And then applied to them did he the 16mm holesaw and great was his fear, saying aloud, "If I f*ck this up, there'll be all kinds of trouble". But the soothing waters had steadied his hand and the drill ran true. And at last the holes were complete and wide was the distribution of coolant from the drilling.
And he rested from this labour, saying "Now I just need to weld the crush tubes, and then the plates, then finish the rest of the rear brace, and the other set of side tubes, and the pedal box brackets, and the other column mount, and......". So great was this list of incomplete things that he was rendered insensible and thus did his wife find him, staring at the wall and muttering. And she didst guide him away and render more soothing waters until he did sleep.
Seriously (?!), a mate CNC cut these plates from my MDF templates and, after a couple of test iterations in acrylic, the steel ones are now lined up ready for welding. Paul H made me some nice little crush tubes and the whole shebang will give me a very solid but removable back edge for the engine bay. And, if I ever stop working 60+ hours a week, I might actually find time to weld it all together.
More in the next posting
- Apologies to a couple of people who had made comments that hadn't appeared. I didn't notice them waiting for approval and Blogger (apparently) didn't send me an email to say they where there.
Feb 2009 - Re-posting this here from where it has already appeared on OzClubbies etc.
The Parable of the Plates
In the month of February an angel visited Dominic, giving to him several shining metal plates. And great was the beauty of these plates for they had been cut not by human hands but by the artificers of Sea-En-Sea. And Dominic did gaze upon the plates and knew that they were good for they had been made to The Plan.
And six were the plates in number but only three in shape for they had been made in pairs. And clear from their shape was their destiny. And this destiny was to be permanently joined to the Bay of the Engine, thence to work tirelessly at support and bracing.
And Dominic held the plates to the chassis, even though it still remains partial and unformed as it has been, and will be, eternally. And the plates did fit - verily, so close was the fit that he did exclaim, saying "That's pretty snug. You couldn't get a fanny hair in that gap". And great was his pleasure at this fitting.
And then he didst say to himself "Bugger, how am I going to drill 16mm holes in alignment when the tubes are already welded into the chassis". And his disappointment at this poor planning was much. But, familiar with pain and struggle in the service of the revered Clubman, he didst regather himself and cogitated for some time. And this cogitation was helped by the application of soothing waters bearing the Holy names Coonawarra and Macaren Vale. And the cogitation did bear fruit and he awakened saying "The bloody plate can be it's own drill guide".
So he did clamp the plates firmly and many were the checkings of alignment. And then applied to them did he the 16mm holesaw and great was his fear, saying aloud, "If I f*ck this up, there'll be all kinds of trouble". But the soothing waters had steadied his hand and the drill ran true. And at last the holes were complete and wide was the distribution of coolant from the drilling.
And he rested from this labour, saying "Now I just need to weld the crush tubes, and then the plates, then finish the rest of the rear brace, and the other set of side tubes, and the pedal box brackets, and the other column mount, and......". So great was this list of incomplete things that he was rendered insensible and thus did his wife find him, staring at the wall and muttering. And she didst guide him away and render more soothing waters until he did sleep.
Seriously (?!), a mate CNC cut these plates from my MDF templates and, after a couple of test iterations in acrylic, the steel ones are now lined up ready for welding. Paul H made me some nice little crush tubes and the whole shebang will give me a very solid but removable back edge for the engine bay. And, if I ever stop working 60+ hours a week, I might actually find time to weld it all together.
More in the next posting
Subscribe to:
Posts (Atom)